BE250022009 DOT-4 Clutch master cylinder. (9.5 mm bore) OEM GASGAS ENDURO & TRIALS models - long lever in silver color.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Rebuild kit is part number BT27722208.
Click on image to enlarge.
BE250522009 MINERAL OIL TYPE Clutch master cylinder. (9.5 mm bore) OEM GASGAS ENDURO & TRIALS models - long lever in silver color.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Click on image to enlarge.
BEP250422010 Rear Brake master cylinder, integral reservoir type. OEM GASGAS PAMPERA 2004~2006.
NOTE: AMA LEGAL. Internal reservoir type. DOES NOT USE an external fluid reservoir. 10 X 1.0 mm thread.
Alternatives: R340100 External reservoir type, with side exit. Use with reservoir number L200010.
Cap w/diaphram Kit is R346010
Click on image to enlarge.
NO LONGER AVAILABLE
SEE BT280022008
BT27722008 Front Brake master cylinder. (9.5 mm bore) OEM GASGAS Trial models 1997~1998 Rear lower banjo type exit hole, short two finger lever.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Alternatives: BT280022008 Long lever version.
Rebuild kit is part number BT27722208.
Click on image to enlarge.
NO LONGER AVAILABLE
SEE BT280022009
BT27722009 SEE BT280022009 - Clutch master cylinder. (9.5 mm bore) OEM GASGAS Trial models 1997~1998 Rear lower banjo type exit hole, short two finger lever. This is also a component of the HEBO Universal Hydraulic Clutch kit which is part number HR8900101L.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Alternatives: BT280022009 Long lever version.
Rebuild kit is part number BT27722208.
Click on image to enlarge.
BT280022008 Front brake master cylinder. (9.5 mm bore) OEM GASGAS Trial models 1999~2003. (not PRO) Rear lower banjo type exit hole, long lever in silver color.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Alternatives: BT27722008 short lever version.
Rebuild kit is part number BT27722208.
Click on image to enlarge.
BT280022009 Clutch master cylinder. (9.5 mm bore) OEM GASGAS Trial models 1999~2003. (not PRO) Rear lower banjo type exit hole, long lever in silver color.
NOTE: AMA LEGAL. 10 X 1.0 mm thread.
Alternatives: BT27722009 short lever version.
Rebuild kit is part number BT27722208.
Click on image to enlarge.
NUMBER CHANGED TO
BT61000R3009
BT280222008 SUPERSEDES TO BT61000R3009 -
Front brake master cylinder. (9.5 mm bore) OEM GASGAS Trial Pro models 2002~2006 Front exit hose, long lever in silver color.
NOTE: AMA LEGAL. Fits most trials motorcycles from most manufacturers with front exit hose. 10 X 1.0 mm thread.
Alternatives: BT280222008R The GASGAS Pro RAGA special edition uses this small body "Racing" master cylinder. R340001 long length lever in black.
Rebuild kit is part number BT27722208
Click on image to enlarge.
BT280222008R Front brake small body "Racing" master cylinder. (9.5 mm bore) OEM GASGAS Trial Pro RAGA special edition and various production Trial models 2004~2011 Front exit hose, medium length three finger lever in silver color with break away tip.*
NOTE: AMA LEGAL. Can be used as a direct replacement on most brands of Trial machines from most manufacturers. Fits most trials motorcycles from most manufacturers with front exit hose. 10 X 1.0 mm thread.
Alternatives: The large body master cylinder is part number BT280222008. R340001 long length lever in black.
* Specifications are subject to change without notice.
Rebuild kit is part number BT280222209
Cap kit is BT280222210
Click on image to enlarge.
BT280222009 Clutch small body "Racing" master cylinder. (9.5 mm bore) DOT4 type. OEM GASGAS Trial Pro model 2002~2007 Front exit hose, medium length three finger lever in silver color with break away tip.*
NOTE: AMA LEGAL. Can be used as a direct replacement on most brands of Trial machines from most manufacturers with front exit hose. 10 X 1.0 mm thread.
Alternatives: The large body DOT4 clutch master cylinder in this configuration is part number Part number BE250022009. The MINERAL OIL clutch master cylinder in this configuration is part number Part number BT280422009.
* Specifications are subject to change without notice.
Rebuild kit is part number BT280222209
Cap kit is BT280222210
Click on image to enlarge.
BT280222010 Rear Brake master cylinder, DOT4 remote reservoir type. ( 9.5 mm bore )
OEM GASGAS Trial Pro model 2002~2010.
NOTE: AMA LEGAL. External reservoir type. 10 X 1.0 mm thread.Feed hose nipple rotates 360 degrees for alignment, mounting-point spacing is 40mm CtoC .
Alternatives: N/A
Rebuild kit is part number BT280222220
Click on image to enlarge.
BT280422009 - BT46000R3009 MINERAL OIL TYPE Clutch small body "Racing" master cylinder. (9.5 mm bore) MINERAL OIL type. OEM GASGAS Trial Pro RAGA special edition and various production Trial models 2004~2014. Front exit hose, medium length three finger lever in silver or titanium color with break away tip.*
NOTE: AMA LEGAL. Can be used as a direct replacement on most brands of Trial machines from most manufacturers using only a mineral oil slave cylinder system with front exit hose. 10 X 1.0 mm thread.
Alternatives: The DOT4 clutch master cylinder in this configuration is part number Part number BT280222009. The large body DOT4 clutch master cylinder is part number BE250022009. Older DOT4 type is number R345000.
* Specifications are subject to change without notice.
Rebuild kit is for mineral oil, part number BT280422209
Cap kit for mineral oil is BT280422210
Click on image to enlarge.
BT660002811 Rear Brake master cylinder, DOT4 integral reservoir type. (9.5 mm bore) OEM GASGAS Trial Pro model 2011. (Also used on the 2010 GasGas Pro - RAGA Special Edition)
NOTES: AMA LEGAL. External reservoir type. 10 X 1.0 mm thread. DOES NOT fit older model GasGas Pro due to interference with the exhaust system, mounting-point spacing is 40mm CtoC
Alternatives: N/A
Rebuild kit is part number BT280222220
Click on image to enlarge.
NO LONGER AVAILABLE
SEE BT280222008
OR BT280222008R
R340001 (NO LONGER AVAILABLE) Front brake master cylinder. (9.5 mm bore) OEM GASGAS Trial model 1992~1996. Front exit hose, 10 X 1.0 mm thread, long length lever in black.
Alternatives: See also BT280222008 and the small body "racing" model Part number BT280222008R.
Rebuild kit is part number R346000
Cap kit is part number R346010
Click on image to enlarge.
NO LONGER AVAILABLE SEE BT280222009
R345000 (NO LONGER AVIALABLE) Clutch master cylinder. (9.5 mm bore) DOT4 type. OEM GASGAS Trial 1992~1996. Front exit hose, 10 X 1.0 mm thread, long length lever in black.
Alternatives: See also BE250022009, BT280222009M, and the small body "racing" model Part number BT280222009.
Rebuild kit is part number R346000
Cap kit is part number R346010
Click on image to enlarge.
R350100 Rear Brake master cylinder, remote reservoir type. BREMBO brand. ( 11.0 mm bore ) OEM GASGAS Trial 1990~2004 and PAMPERA 1996~2003.
NOTE: AMA LEGAL. External reservoir type, with side exit. 10 X 1.0 mm thread. This model fits many years, and many different brands of Trial motorcycles. Body mounting holes are threaded and spaced 40 mm C to C. Threaded mounting inserts can be removed for through bolt applications. Feed hose nipple rotates 360 degrees for alignment .
NOTE: Rebuild kit is NO LONGER AVAILABLE
Click here for dimensional drawing
Click on image to enlarge.